CE approved Medical fluid/blood infusion warmer BFW-1020B
Country of Origin︰
Temperature controlling technology:
Adopt intellectual microcomputer controlling technology, quickly warm up device with high capacity,control the temperature accurately in the predeterature,and own intellectual detection,safe and reliable.
Large TFT LCD display:
Real-time liquid temperature,set temperature,room temperature,dropping speed (10-300 drips/min),warming time,alarm indication,electricity on or off indication,liquid exist or not indication.
Mode 1: Below 200 ml/min
Mode 2: 200-500ml/min
Mode 3: 500-1500ml/min
Mode 4: 1500-3000ml/min
Mode 5: 3000-5000ml/min
Mode 6: Above 10000ml/min
Low temperature alarm: After working five minutes with the set temperature,if the warming plate’s temperature is lower than the set temperature,the alarm lights flashes with the regular alarm sound,showing the alarm information ( CAN’T BE HEATED ).
High temperature alarm: When the liquid temperature is higher than the limit temperature,the alarm is triggered,at this time,high temperature warning lights are on with alarm sound.Showing the information ( OVERHEAT-LIQUID ).The apparatus will automatically stop warming.
Infrared detection: Sound alarm of finishing infusion.
RS-232 port for computer control centre.
Power supply: AC 220V±10% 50Hz±1Hz
Power: ≤ 300W
Temperature range: 28℃-36℃ (Increasing by 0.1℃) ± 0.5℃
82℉-87℉ (Increasing by 0.2℉)±1℉
Outer dimension: 190mm x 260mm x 150mm
Waterproof and dustproof class: lp64